Biotransformation of Raw Mango Seed Waste into Bacterial Hydrolytic Enzymes Enhancement Via Solid State Fermentation Strategy.

Solid waste generation is a huge contributor to environmental pollution issues, and food wastes are prominent in this category due to their large generation on a day-to-day basis. Thus, the settlement of daily food waste is one of the major constraints and needs innovative manufacturing sheme to valorize solid waste in sustainable manner. Moreover, these food wastes are rich in organic content, which has promising scope for their value-added products. In the present study, raw mango seed waste has been biotransformed to produce bacterial hydrolytic enzymes as feedstock. On investigating the impact of substrate, the highest bacterial cellulase production was recorded to be 18 IU/gds FP (filter paper) in 24 h of microbial incubation at 5 g of substrate in solid-state fermentation (SSF). Furthermore, at 40 °C and pH 6.0, 23 IU/gds FP enzyme could be produced in 24 h of SSF. Beside this, on comparing the influence of inorganic and organic nitrogen sources, urea has been found to provide better cellulase production, which yielded 28 IU/gds FP in 24 h of incubation, along with 77 IU/gds BG (ß-glucosidase) and 89 IU/gds EG (endoglucanase). On the other hand, Tween-40 and Tween-80, two different surfactants, were employed at a 1.0% concentration for 24 h of incubation. It was noticed that Tween-80 showed complete enzyme activity at 24 h, which was found to be relatively superior to that of Tween-40. This study may have potential utility in enzyme production using mango seed as a food waste for various industrial applications.

Development and evaluation of a protease inhibitor antiretroviral drug-loaded carbon nanotube delivery system for enhanced efficacy in HIV treatment.

The primary objective of this study was to enhance the effectiveness of the protease inhibitor antiretroviral drug by designing a novel delivery system using carboxylated multiwalled carbon nanotubes (COOH-MWCNTs). To achieve this, Fosamprenavir calcium (FPV), a prodrug of amprenavir known for inhibiting the proteolytic cleavage of immature virions, was selected as the protease inhibitor antiretroviral drug, and loaded onto COOH-MWCNTs using a direct loading method. The structural specificity of the drug-loaded MWCNTs, the percent entrapment efficiency, and in vitro drug release were rigorously evaluated for the developed formulation, referred to as FPV-MWCNT. Fourier transform infrared (FTIR) spectroscopy, Field emission scanning electron microscopy (FE-SEM), Raman spectroscopy, and atomic force microscopy (AFM) techniques were employed to confirm the structural integrity and specificity of the FPV-MWCNT formulation. The results demonstrated a remarkable entrapment efficiency of 79.57 ± 0.4 %, indicating the successful loading of FPV onto COOH-MWCNTs. FE-SEM and AFM analyses further confirmed the well-dispersed and elongated structure of the FPV-MWCNT formulation, without any signs of fracture, ensuring the stability and integrity of the drug delivery system. Moreover, particle size analysis revealed an average size of 290.1 nm, firmly establishing the nanoscale range of the formulation, with a zeta potential of 0.230 mV, signifying the system's colloidal stability. In vitro drug release studies conducted in methanolic phosphate buffer saline (PBS) at pH 7.4 and methanolic acetate buffer at pH 5 demonstrated sustained drug release from the FPV-MWCNT formulation. Over a period of 96 h, the formulation exhibited a cumulative drug release of 91.43 ± 2.3 %, showcasing the controlled and sustained release profile. Furthermore, hemolysis studies indicated a notable reduction in the toxicity of both FPV and MWCNT upon conjugation, although the percent hemolysis increased with higher concentrations, suggesting the need for careful consideration of dosage levels. In conclusion, the findings from this study underscore the potential of the FPV-MWCNT formulation as an effective and promising drug-conjugated system for delivering antiretroviral drugs. The successful encapsulation, sustained drug release, and reduced toxicity make FPV-MWCNT a compelling candidate for enhancing the therapeutic efficacy of protease inhibitor antiretroviral drugs in the treatment of HIV. The developed delivery system holds great promise for future advancements in HIV treatment and paves the way for further research and development in the field of drug delivery utilizing carbon nanotube-based systems.

Date seed waste derived nanocatalyst and its application in production of hydrolytic enzyme, fermentative sugars and biohydrogen.

Biofuel production from cellulosic biomass is a promising approach; however, the cost-intensive utilization of cellulolytic enzymes is a major roadblock to economic production. This study reports the preparation of a nanocatalyst using date seed and evaluates the impact of nanocatalysts on cellulolytic enzyme production using solid-state fermentation of date pulp waste through bacterial co-cultivation. Under optimized conditions, 30 IU/gds filter paper activity is produced in the presence of 2 mg of nanocatalyst. Cellulase showed thermal stability at 50 °C and pH 7 up to 10 h in the presence of nanocatalyst, and it produced 32.31 g/L glucose through the hydrolysis of acidic-pretreated date seeds in 24 h. Subsequently, 1788 mL/L of cumulative H2 in 24 h through cocultured dark fermentation could be produced. The approach presented in this study can be effective for multiple value additions, including nanocatalyst preparation, cellulase enzyme, and biohydrogen production.

COVID Variants, Villain and Victory: A Bioinformatics Perspective.

The SARS-CoV-2 virus, a novel member of the Coronaviridae family, is responsible for the viral infection known as Coronavirus Disease 2019 (COVID-19). In response to the urgent and critical need for rapid detection, diagnosis, analysis, interpretation, and treatment of COVID-19, a wide variety of bioinformatics tools have been developed. Given the virulence of SARS-CoV-2, it is crucial to explore the pathophysiology of the virus. We intend to examine how bioinformatics, in conjunction with next-generation sequencing techniques, can be leveraged to improve current diagnostic tools and streamline vaccine development for emerging SARS-CoV-2 variants. We also emphasize how bioinformatics, in general, can contribute to critical areas of biomedicine, including clinical diagnostics, SARS-CoV-2 genomic surveillance and its evolution, identification of potential drug targets, and development of therapeutic strategies. Currently, state-of-the-art bioinformatics tools have helped overcome technical obstacles with respect to genomic surveillance and have assisted in rapid detection, diagnosis, and delivering precise treatment to individuals on time.

Production of fermentable glucose from bioconversion of cellulose using efficient microbial cellulases produced from water hyacinth waste.

The economic production of cellulase enzymes for various industrial applications is one of the major research areas. A number of broad industrial applications, for example, in cellulosic biomass hydrolysis for simple sugars such as glucose and subsequent biofuel production, make these enzyme systems the third most demanding enzymes. Nevertheless, due to their production on commercial substrates, cellulases fall into the category of costly enzymes. Therefore, the goal of the present work is to evaluate the enhancement of cellulase production and its utilization in the enzymatic hydrolysis of biomass using low-cost cellulosic substrate, which is abundant and widely available. In this context, waste biomasses of water hyacinth (WH), including leaves and stems, have been used as feedstock to produce cellulases via solid-state fermentation (SSF) in the current study, which improves its production as well as activity. Furthermore, the impact of process parameters like temperature and pH has been investigated for improved cellulase production. At optimum concentration using 10 g of feedstock, 22 IU/gds of FP, 92 IU/gds of BGL, and 111 IU/gds of EG have been noticed in day 5 of SSF. Herein, 40 °C has been identified as the optimum temperature for cellulase production, whereas 50-55 °C has been recorded as the optimum reaction temperature for cellulase enzyme activity. Additionally, pH 5.5 has been identified as the optimum pH for cellulase enzyme production, whereas this enzyme was thermally stable (55 °C) at pH 5.0 up to 3.5 h. Further, the cellulosic biomass hydrolysis of WH leaves via an optimized crude enzyme has been performed, and this could release 24.34 g/L of glucose in 24 h of the reaction. The current findings may have potential for developing cellulases for mass-scale production using WH-based waste bioresources for numerous biorefinery applications.

Bionanofabrication of Cupric oxide catalyst from Water hyacinth based carbohydrate and its impact on cellulose deconstructing enzymes production under solid state fermentation.

One of the most important properties of cellulolytic enzyme is its ability to convert cellulosic polymer into monomeric fermentable sugars which are carbohydrate by nature can efficiently convert into biofuels. However, higher production costs of these enzymes with moderate activity-based stability are the main obstacles to making cellulase-based applications sustainably viable, and this has necessitated rigorous research for the economical availability of this process. Using water hyacinth (WH) waste leaves as the substrate for cellulase production under solid state fermentation (SSF) while treating the fermentation production medium with CuO (cupric oxide oxide) bionanocatalyst have been examined as ways to make fungal cellulase production economically feasible. Herein, a sustainable green synthesis of CuO bionanocatalyst has been performed by using waste leaves of WH. Through XRD, FT-IR, SEM, and TEM analysis, the prepared CuO bionanocatalyst's physicochemical properties have been evaluated. Furthermore, the effect of CuO bionanocatalyst on the temperature stability of raw cellulases was observed, and its half-life stability was found to be up to 9 h at 65 °C. The results presented in the current investigation may have broad scope for mass trials for various industrial applications, such as cellulosic biomass conversion.

Enhancement in Bacterial Cellulolytic Enzyme Production Using Acid-Pretreated Banana Peel Waste: A Comparative Evaluation.

Banana peel waste is one of the major contributors in the issue raised from solid waste, however, it can be valorized effectively due to high content of cellulose and hemicellulose. Significant conversion of banana waste includes cellulolytic enzymes and bioenergy production. In the present study, bacterial cellulase was produced using raw banana peel and ripe banana peel under SSF. Additionally, impact of acid pretreatment was investigated as one of strategy to improve cellulolytic enzyme production. A comparative evaluation of raw and ripe banana peels showed that ripe banana peels showed better enzyme production after pretreatment with 0.5% dilute HCl acid. In the series of enhancement of the enzyme production, temperature and pH of the SSF medium were also investigated, and found temperature 35 °C and pH 6.0 were optimum to produce maximum 3.5-U/ml FPA, 39-U/ml BGL, and 54-U/ml EG in 18-h SSF incubation. The study presented eco-friendly waste management to produce industrial enzyme for its promising application in waste valorization and biorefinery area.

Recent advances in microbial engineering approaches for wastewater treatment: a review.

In the present era of global climate change, the scarcity of potable water is increasing both due to natural and anthropogenic causes. Water is the elixir of life, and its usage has risen significantly due to escalating economic activities, widespread urbanization, and industrialization. The increasing water scarcity and rising contamination have compelled, scientists and researchers, to adopt feasible and sustainable wastewater treatment methods in meeting the growing demand for freshwater. Presently, various waste treatment technologies are adopted across the globe, such as physical, chemical, and biological treatment processes. There is a need to replace these technologies with sustainable and green technology that encourages the use of microorganisms since they have proven to be more effective in water treatment processes. The present review article is focused on demonstrating how effectively various microbes can be used in wastewater treatment to achieve environmental sustainability and economic feasibility. The microbial consortium used for water treatment offers many advantages over pure culture. There is an urgent need to develop hybrid treatment technology for the effective remediation of various organic and inorganic pollutants from wastewater.

Microbial engineering approaches for wastewater treatment.Current and emerging sources of water pollution are discussed.Various treatment technologies for wastewater treatment.Biological methods and microbes are used for degradation.Parameters responsible for the degradations processes of wastewater.

Production Enhancement of Bacterial Cellulase Cocktail Using Potato Peels Waste Feedstock and Combination of Water Hyacinth Root and Pea Pod Extract as Natural Nutrient Media: Application in Bioconversion of Potato Peels.

Solid wastes are the major contributors in global environmental pollution and their management is the need of urgency towards development of sustainable world. In the present work, solid waste of potato peels has been used as feedstock for fermentation of bacterial cellulase production and substrate for enzymatic hydrolysis via this enzymes cocktail. Additionally, liquid extracts of pea pod and root of water hyacinth wastes have been used to complete nutritional requirements and moisture balance in SSF process during the course of enzyme production. At optimum feedstock concentration of 6.0 g PPW and 10:40 extract-based moisture ratio of WHR and Ppw, Bacillus sp. produced 15 U/gds FP in 18 h, whereas maximum 36 U/gds BGL and 42 U/gds EG have been recorded in 24 h of SSF. Temperature 35 °C and pH 5.5 were optimum for enzyme production while the produced enzyme was thermally stable upto 30 h at 35 °C with 100% pH stability upto 14 h and 77% relative activity at 34 h. The optimized bacterial enzymes have been used for bioconversion of PPW biomass and 26 g/L glucose has been recorded at a hydrolytic temperature of 50 °C and pH 5.0. The study may have feasible promising scope in cellulosic biorefineries and waste management.

Facile pretreatment strategies to biotransform Kans grass into nanocatalyst, cellulolytic enzymes, and fermentable sugars towards sustainable biorefinery applications.

The present investigation is targeted towards the facile fabrication of a carbon-based nanocatalyst (CNCs) using Kans grass biomass (KGB) and its sustainable application in microbial cellulase enhancement for the alleviation of enzymatic hydrolysis for sugar production. Different pretreatments, including physical, KGB extract-mediated treatment, followed by KOH pretreatment, have been applied to produce CNCs using KGB. The presence of CNCs influences the pretreatment of KGB substrate, fungal cellulase production, stability, and sugar recovery in the enzymatic hydrolysis of KGB. Using 1.0% CNCs pretreated KGB-based solid-state fermentation, 33 U/gds FPA and 126 U/gds BGL were obtained at 72 h, followed by 107 U/gds EG at 48 h in the presence of 0.5% CNCs. Further, 42 °C has been identified as the optimum temperature for cellulase production, while the enzyme showed thermal stability at 50 °C up to 20 h and produced 38.4 g/L sugar in 24 h through enzymatic hydrolysis of KGB.

Dealing with infodemic during COVID-19 pandemic: Role of effective health communication in facilitating outbreak response & actions - An ICMR experience.

Objectives: To highlight and assess the impact of intervention tools used by Indian Council of Medical Research (ICMR) against COVID19 associated infodemic in the world's largest democratic country, India. Study design: It is a retrospective cross sectional study. The impact of ICMR's multi-pronged strategy to address the infodemic during pandemic has been assessed through analysis of print media reportage and social media engagements. Methods: The impact of the interventions was assessed using cloud media mappers like MediaCloud and Meltwater using keywords. The data was analysed in terms of reportage, theme of reportage. A sub-section of media reportage (Feb 2020-June 2020) was analysed in details from 4 major dailies to understand the coverage and tonality of media reports. The data on COVID 19 related tweets, posts and uploads were taken from social media platforms of Indian Council of Medical Research (ICMR) particularly twitter, instagram, facebook and youtube and estimate of pre and post pandemic changes in followers or users were collected for analysis. The data was curated and analysed using MS excel. Results: There was a surge of 3800% reportage in media during pandemic as compared to same time frame in pre-pandemic times. A surge of followers on twitter from 26,823 on Feb 2020 (before pandemic) to 3,36,098 at March 2022 (after pandemic) was observed. A drastic increase in monthly followers was observed after start of Pandemic (after Feb 2020) in comparison to before pandemic (Before Feb 2020). Similar trends were observed on other social media platforms of ICMR. Conclusions: The Communications Unit at ICMR geared up with more robust plans and designed several interventions to mitigate the infodemic which helped in evidence based decision making towards outbreak response and action. This highlights the importance of evidence based, crisp, timely and effective communication during the epidemics/pandemics to buid trust and confidence in the community.

Carbon Nanotubes in Breast Cancer Treatment: An Insight into Properties, Functionalization, and Toxicity.

Breast cancer is the most common cancer among women worldwide. It is the main reason why women die from cancer. Early diagnosis due to increased public awareness and better screening helps to tackle the disease through surgical resection and curative therapies. Chemotherapies are frequently used for cancer treatment, but these have severe adverse effects due to a lack of target specificity. Formulation development scientists and clinicians are now particularly concerned with developing safe and efficient drug delivery systems for breast cancer treatment. Potentially relevant literature to get the latest developments and updated information related to properties, functionalization, toxicity and application of carbon nanotubes in breast cancer treatment has been obtained from Web of Science, Scopus, and PubMed portals. Nanomedicine has emerged as a novel tool for target-specific delivery systems and other biomedical applications. Carbon nanotubes (CNTs) are gaining popularity due to their unique mechanical and physiochemical properties for the diagnosis and treatment of cancer. It is a promising carrier that can deliver micro and macromolecules to the cancer cell. CNTs can be functionalized at the surface with different functional groups, which helps in targeting the drugs to target cancer cells. The present review has elaborated on different functionalization approaches and toxicity aspects of CNTs.

Association between serum interleukin-6, leptin and insulin in gestational diabetes mellitus - a cross- sectional study.

Purpose: Gestational diabetes mellitus (GDM) is a state of leptin resistance which develops a vicious cycle of hyperinsulinemia and hyperleptinemia leading to aggravation of an inflammatory situation. This study was done to find out the association between IL-6, leptin and insulin in gestational diabetes among North Indian women. Method: This cross-sectional study included 100 GDM, 100 non-GDM and 50 non-pregnant women. DIPSI (Diabetes in Pregnancy Study Group India) criteria was used for screening GDM among pregnant women. GDM and non-GDM pregnant women were further categorized into three groups according to the trimester of pregnancy. Serum IL-6, leptin and insulin were measured in all the enrolled women. Results: Serum IL-6 levels were significantly higher among GDM women as compared to non-GDM and non-pregnant women. Although the mean serum leptin and insulin levels were higher in GDM, but the difference was not statistically significant. When GDM and non-GDM women were categorized into three trimester, serum leptin levels were found to be significantly higher in 3rd trimester (p < 0.002) and IL-6 in 1st trimester (p < 0.017) among GDM women. No correlation was found between serum IL-6, leptin and insulin in GDM. Conclusion: Absence of any significant association between leptin and IL-6 signifies that leptin may not be associated with inflammation in gestational diabetes. However, IL-6 may serve as an early marker for screening glucose intolerance during pregnancy. Supplementary Information: The online version contains supplementary material available at 10.1007/s40200-023-01188-3.

Biologically derived copper oxide-based nanocatalyst using Moringa oleifera leaves and its applications in hydrolytic enzymes and biohydrogen production.

Due to the limited availability of fossil fuels, pollution causing serious environmental issues, and their continuously rising price, the development of low-cost efficient enzymes and their implementation in biomass-based bioenergy industries are highly demanded. In the present work, phytogenic fabrication of copper oxide based nanocatalyst has been performed using moringa leaves and has been characterized using different techniques. Herein, the impact of different dosages of as-prepared nanocatalyst on fungal co-cultured cellulolytic enzyme production under co-substrate fermentation using wheat straw and sugarcane bagasse in 4:2 ratios in solid state fermentation (SSF) has been investigated. An optimal concentration of 25 ppm of nanocatalyst influenced the production of 32 IU/gds of enzyme, which showed thermal stability at 70 °C for 15 h. Additionally, enzymatic bioconversion of rice husk at 70 °C librated 41 g/L of total reducing sugars, which led to the production of 2390 mL/L of cumulative H2 in 120 h.

Microbial cellulase production and stability investigations via graphene like carbon nanostructure derived from paddy straw.

Cellulases are among the most in-demand bioprocess enzymes, and the high cost of production, combined with their low enzymatic activity, is the main constraint, particularly in the biofuels industry. As a result, low-cost enzyme production modes with high activity and stability have emerged as the primary focus of research. Here, a method for producing a graphene like carbon nanostructure (GLCNs) has been investigated utilizing paddy straw (Ps), and its physicochemical characteristics have been examined using a variety of techniques including XRD, FT-IR, SEM and TEM. Further, the pretreatment of Ps feedstock for cellulase production was done using diluted waste KOH liquid collected during the preparation of the GLCNs. To increase the production and stability of the enzyme, newly prepared GLCNs is utilized as a nanocatalyst. Using 15 mg of GLCNs, 35 IU/gds FP activity was seen after 72 h, followed by 158 IU/gds EG and 114 IU/gds BGL activity in 96 h. This nanocatalyst supported enzyme was thermally stable at 70 °C up to 15 h and exhibited stability at pH 7.0 for 10 h by holding 66 % of its half-life.

Rice straw derived graphene-silica based nanocomposite and its application in improved co-fermentative microbial enzyme production and functional stability.

Cellulases are the one of the most highly demanded industrial biocatalysts due to their versatile applications, such as in the biorefinery industry. However, relatively poor efficiency and high production costs are included as the key industrial constraints that hinder enzyme production and utilization at economic scale. Furthermore, the production and functional efficiency of the ß-glucosidase (BGL) enzyme is usually found to be relatively low among the cellulase cocktail produced. Thus, the current study focuses on fungi-mediated improvement of BGL enzyme in the presence of a rice straw-derived graphene-silica-based nanocomposite (GSNCs), which has been characterized using various techniques to analyze its physicochemical properties. Under optimized conditions of solid-state fermentation (SSF), co-fermentation using co-cultured cellulolytic enzyme has been done, and maximum enzyme production of 42 IU/gds FP, 142 IU/gds BGL, and 103 IU/gds EG have been achieved at a 5 mg concentration of GSNCs. Moreover, at a 2.5 mg concentration of nanocatalyst, the BGL enzyme showed its thermal stability at 60°C and 70 °C by holding its half-life relative activity for 7 h, while the same enzyme demonstrated pH stability at pH 8.0 and 9.0 for the 10 h. This thermoalkali BGL enzyme might be useful for the long-term bioconversion of cellulosic biomass into sugar.

Protein-protein networks analysis of differentially expressed genes unveils the key phenomenon of biological process with respect to reproduction in endangered catfish, C. Magur.

Clarias magur (magur) is an important freshwater catfish with high potential in the aquaculture sector in its geographical ranges of distribution. One of the impediments to realise its full aquaculture potential is the lack of understanding key genes involved in its reproduction pathways. Nonetheless, very limited information is available on brain and gonads, with respect to reproduction related issues of magur at molecular level. The present study was aimed at understanding the interaction of the brain-gonad system by analysing differentially expressed genes (DEG) in brains and gonads of male and female magur using a protein-protein network interaction study. In brief, 641, 541, 225 and 245 DEGs, respectively, in ovary, testis and female brain and male-brain of magur were used as input in String database 11.0 and Cytoscape v 3.8.0 plug-in Network Analyzer for PPI network construction followed by network superimposition, network merging and analysis. A total of 13 key genes in female brain & ovary and 12 key genes in male brain & testis were obtained based on the network topological parameter betweenness centrality and nodes degree. Among them, cyp19a1b and amh genes in male brain-testis and Tp53 and exo1 genes in female brain-ovary were identified as hub genes having a high level of interaction and expression with other key genes in the network. Further, functional annotation study of these genes revealed their active involvement in important pathways related to reproduction. This is the first report exploring the interaction of brain and gonads in the regulation of magur reproduction through a protein-protein interaction network. The 25 key genes identified in the combined network are involved in various pathways, like neuropeptide signalling pathway, oxytocin receptor-mediated signalling pathway, corticotrophin-releasing factor receptor signalling pathway and reproduction process, which could lead to a better understanding of the magur reproductive system.